High-speed, high-precision CNC milling. The Haas VF-2SS Super-Speed delivers a 12,000 RPM direct-drive spindle, 1,400 IPM rapids on all three axes, and a 30+1 side-mount tool changer with 2.2-second chip-to-chip time — engineered for tight tolerances, fast cycle times, and consistent quality on every part.
The VF-2SS is not simply a standard VF-2 running faster. Every major performance parameter is substantially upgraded — spindle speed, rapid traverse, and tool change time all improve significantly over the standard machine.
The 12,000 RPM inline direct-drive spindle eliminates the belt-drive transmission of standard models. Direct coupling between the servo motor and spindle delivers higher speed, lower vibration, and better surface finish — especially critical for aluminum and close-tolerance parts.
Rapids of 1,400 IPM on X, Y, and Z reduce non-cutting time between features and operations. On parts with many small features spread across the table, faster rapids translate directly into shorter cycle times — often significantly on complex parts with many tool paths.
The 30+1 SMTC mounts on the machine column rather than the spindle head. While the spindle moves to the next operation's position, the tool change occurs simultaneously — reducing chip-to-chip time to 2.2 seconds and keeping the machine cutting, not waiting.
The VF-2SS is equally at home on one-off prototype work and high-volume production runs — combining fast cycle times, tight tolerances, and broad material capability in a compact, proven platform.
Full simultaneous 3-axis contouring for complex profiles, pockets, slots, and surfaces. Rigid servo drives with 1,995 lbf thrust on X/Y and 3,085 lbf on Z provide the cutting force needed for aggressive material removal across a wide range of workpiece materials.
X 30″ · Y 16″ · Z 20″The 12,000 RPM spindle reaches the surface speeds needed for efficient aluminum machining with carbide tooling. High rapids minimize air-cut time between features. Flood coolant with programmable nozzle keeps chips clear and workpiece temperature stable.
12,000 RPM · Flood CoolantSynchronized spindle and feed for rigid tapping eliminates floating tap holders. The VF-2SS produces accurate threads in a single operation — including blind holes — with synchronized reversal for clean thread form without tap breakage from tool holder compliance.
Standard — No Tap Holder FloatThe VF-2SS is factory-equipped for 4th-axis rotary table integration. Adding a Haas HRT or TRT series rotary enables indexing and full 4-axis simultaneous contouring — expanding the machine's capability to multi-sided parts, angular features, and complex geometries.
4th-Axis Prep StandardThe programmable coolant nozzle positions automatically to direct flood coolant exactly where needed for the current tool — no manual adjustment between setups. Optional through-spindle coolant (TSC) drives high-pressure coolant through the tool for deep-hole drilling and aggressive cutting.
Programmable Nozzle · TSC OptionalThe Next Generation Control features a 15″ color touchscreen, USB and Ethernet connectivity, 1 GB program memory, and an intuitive interface. Programming includes conversational Quick Code, full G-code, macros, coordinate rotation, scaling, and work offset memory for complex setups.
15″ Touch · 1 GB · EthernetComplete technical data for the Haas VF-2SS Super-Speed CNC vertical machining center at Lasertech Metal Works.
The Haas Next Generation Control is purpose-built for shop-floor operation. It combines powerful programming features with an accessible interface that reduces setup time and minimizes operator error.
Lasertech's VF-2SS is configured with the full NGC suite including program memory, networking, and macro capability — enabling complex multi-operation programs to run reliably and consistently from first article through production.
Large, high-resolution display with touch input for intuitive navigation — program editing, offset entry, and diagnostics all accessible at the machine.
Stores complex programs locally at the machine — including large surface-machining toolpaths — without DNC drip-feeding. USB and Ethernet for fast program transfer from CAM workstations.
Full macro programming (Custom Macro B / Fanuc-compatible) and multiple work offsets enable complex fixturing, family-of-parts programs, and automated probing routines without reposting CAM code.
Built-in transformations for angled features, mirror-image parts, and scaled prototype-to-production programs — without editing toolpaths or re-posting from CAM.
The control monitors incoming power and initiates controlled shutdown if power quality drops — protecting the machine, workpiece, and cutting tools from uncontrolled power loss events.
The VF-2SS's 30 HP spindle, rigid casting, and 12,000 RPM capability span a wide range of workpiece materials — from high-speed aluminum runs to demanding stainless and tool steel operations.
6061, 7075, 5052 — the VF-2SS's high RPM and rapid traverses make it highly productive on aluminum at aggressive feeds and speeds.
High SFM · Flood Coolant1018, 4140, 4340 — full spindle torque at lower RPM for reliable, consistent metal removal in structural and tooling applications.
High Torque at Working RPM303, 304, 316 — rigid spindle and controlled feeds produce good finishes in stainless without the chatter common to lower-rigidity machines.
Rigid Spindle · Low VibrationD2, A2, H13, P20 — the 30 HP vector drive maintains consistent cutting force at low spindle speed for tough tool steel and hardened workpieces.
30 HP Vector DriveTi-6Al-4V and other alloys — programmed conservatively with proper tooling selection, the VF-2SS produces accurate titanium components across a range of part types.
Conservative Feeds · TSC OptionalNon-ferrous and engineering plastics machine cleanly at high speed with sharp tooling — ideal for prototype parts, fixtures, and electrical components.
High Speed · Clean ChipsThe VF-2SS's work envelope and speed combination suit a broad range of part types — from small precision components to medium-sized structural parts.
The VF-2SS's speed, precision, and versatility make it a valuable asset across industries requiring tight-tolerance machined components in a broad range of materials and geometries.
Machined housings, brackets, mounting plates, and precision components for power generation and electrical equipment assemblies.
Structural components, brackets, and precision housings in aluminum and titanium requiring tight tolerances and full traceability.
Custom machined parts and weldment secondary operations for OEM supply chains — production quantities with consistent quality.
Stainless steel machined components requiring clean finishes, tight-tolerance hole patterns, and food-grade surface quality.
Precision components in stainless steel and aluminum for medical devices, instrumentation, and test equipment.
Custom billet aluminum components, brackets, and precision chassis hardware for high-performance racing applications.
Fast turnaround first articles and prototype parts in any machinable material — from design verification to functional testing.
Precision tooling, jigs, fixtures, and mold components in tool steel and aluminum — supporting internal production and customer tooling programs.
Common questions about the Haas VF-2SS and CNC milling services at Lasertech Metal Works.
The VF-2SS is a Super-Speed CNC vertical machining center from Haas Automation. It features a 12,000 RPM inline direct-drive spindle, 30 HP vector drive, 1,400 IPM rapids on all three axes, and a high-speed 30+1 side-mount tool changer. It is the most popular Super-Speed model in the Haas VF series and is engineered for high-speed, high-volume precision milling.
The SS (Super-Speed) designation means three key things: the spindle runs at 12,000 RPM versus 8,100 on the standard VF-2; rapids run at 1,400 IPM versus 700 IPM; and the side-mount tool changer achieves a 2.2-second chip-to-chip time versus the 3.6 seconds of the standard umbrella ATC. For high-speed aluminum work and production runs, the cycle time difference is substantial.
The VF-2SS handles aluminum alloys, mild and alloy steels, stainless steel, tool steel, titanium, brass, copper, and engineering plastics. Its 12,000 RPM spindle makes it especially productive on aluminum. For harder materials like tool steel or titanium, reduced speeds and appropriate tooling selection are used to maintain tool life and part quality.
The VF-2SS has X-axis travel of 30 inches, Y-axis travel of 16 inches, and Z-axis travel of 20 inches. The table is 36″ × 18″ and supports parts weighing up to 1,500 lbs. Spindle-nose-to-table range is 4″ to 24″, giving sufficient clearance for tall fixturing and most workpiece heights. For larger parts, Lasertech has larger equipment available.
Yes. The VF-2SS ships with factory 4th-axis preparation — enabling integration of a Haas rotary table for indexing and simultaneous 4-axis contouring. This expands capability to multi-sided parts, angular features, and complex geometries that would otherwise require multiple setups and datum transfers.
Call us at 770-461-9941 or use our online contact form. Provide your drawings or CAD files with material type, dimensional tolerances, surface finish requirements, and quantity. We'll review your parts and respond promptly with a detailed quote.